1965 mustang

Been looking for a 1965 or 66 coupe for a while. Came across this one that I like. Spoke to the owner and he stated a few things below Engine and trans rebuilt 10 years ago Always garage kept He has been the same owner since 1972 Paint is in great condition Runs good auto transmission rebuilt...

I recently bought this 1965 T code coupe, and it has a spring sticker on the air cleaner, but I know sprint was made in 66? can anyone help me out

Hello, I have recently got my inline 6 200 completely rebuilt and is running with a 4 speed transmission (5 speed conversion coming soon). I'm loving the car so much, its a very reliable daily driver from class to class. I'm to the point where I want more power just like everyone else. I noticed...

Hello everyone! My name is Jacob, I am 23 and I have dreamed about building a '65 mustang ever since I was a kid. I have little knowledge but alot of desire to learn. Thank you everyone in advance for your help with my project. If anyone would like me to update on progress, please let me...

Looking at this mustang for project car, like the 6 cylinder and that’s a HCS in timberline green like my 67 Fastback. https://www.ebay.com/itm/274489025037

I have a ‘65 convertible with a 200 ci 6-cylinder automatic for 30 years. Haven’t started it in several years but it’s been kept in a dry garage. Now, it turns over but doesn’t start. My guess is either no/poor spark or gas. I’ve changed everything related to spark. Here’s a video of what it...

Hey y’all, total newb here - I came across a MX Cruise-O-Matic, medium case and based on the tag it came off a F100 truck (PFB-A with C5MP casting). Is it possible to use this on a 289 I’m putting in on a 1965 Mustang, if I get the proper bell housing?

Hello everyone, My name is Jorge, I am 19 yrs old and I have a couple important questions. So I've been recently looking for Mustangs from 65-66 to find as a daily driver. I've found a couple and I'm actually going to go look at one on Saturday 6/4/2020. If purchased this is going to be my first...

Greetings- My 1965 Ford Mustang Convertible has a Holley Sniper EFI installed with Holley EFI Dual Sync Distributer, tank mounted electronic fuel pump, LCD reads RPM STALL error when trying to start after shop had the battery disconnected for a few hours and car has sat for a week plus...

Hey everyone happy to be here. I own a restored 1965 coupe, was originally a Poppy Red San Fran built C-code with a three speed. Was repainted signal flare red and upgraded to a 347 stroker and a 4-speed. Currently working on a 1966 Deaborn built Fastback. Car was originally candy apple red...

Hey everyone I'm new around here at least in participation with the community. I'm looking forward to sharing my learning with everyone and mostly reaching out for help. I have a 1965 Wimbledon White Coupe that I have had now for 4 years. The car was originally purchased by my wife's...

Hello, Can anybody recommend me some shops in the LA(California) area that do decent work and are familiar with old mustangs? I have a 65 that I am looking to install subframe connectors on(weld on type) as well looking for front end alignment. Would prefer to have this done by people who...

I have been taking time off to try different combinations of what can be done with my car and I have been thinking of using a v8 289 I already got. Or thinking of switching to a 250 I can look for. Or use the most extreme option of using a Barra 6. I asked before for some build ideas, but with a...

I’ve got a 1965 Mustang Coupe I’m building. Factory 289 car. I’ve got a 302 I’m about to build with a T5 cable clutch to go behind it. I’m wanting to add power brakes. Not doing many mustangs in the past. Any suggestions on affordable brake boosters and master cylinders that will not interfere...

Hi yall, I consider myself much of an amateur regarding cars so I need some help trying to fix my problem. I have a 1965 mustang and I recently repainted the engine covers and oil filter. I'll attach some photos. After reinstalling exactly the same way as I took it out I started it up and a lot...

Hey guys! New to the forum so I first want to thank y’all for having me! So, I’m sure this has been beaten over the head but I can’t really find complete information. I bought a 65 mustang a couple years back that I’ve been slowly rebuilding. I really got no background info on the car so I...

WHAT YALL DOIN? DROP SOME PHOTOS! - MY PICS WILL COME ASAP Extended (influenced) :sneaky: my quarters out ward about an inch each side to accommodate my diff width (rear end's out of a 69). Removed rust (and prior repairs) on the bottom of the quarter panels towards the front of rear wheels...

Noticed my driver's side door on my 1965 Ford Mustang Convertible "drops" a little when opening. How do I correctly realign the door so its opens and closes correctly? What parts do I need and steps to correct this? I keep reading posts about hinges vs repairs kits. Below what I need? Door...

Help, I’ve got a 65 mustang and the hood will not budge from the open position all of the sudden. It is just stuck completely in the full open position and will not move to close. Appears that the hinges are some how binding against themselves.

Looking for a solid '65-'67 Coupe of Fastback Roller. Does not need engine or anything, I just need a solid, original body with no rust. If you have a body with engine, etc. thats fine. I'm looking for this to be a restomod project. I know the price differences between the coupe or fastback, so...