Vintage Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 56 Results
  1. Vintage Mustang Forum
    Hey guys. I'm wiring my 1967 Mustang with American Autowire's harness. I'm connecting my 2-speed wiper motor to the harness and I need to figure out which wires (black, white with red stripe, lt. Blue, & red with lt. Blue stripe) do what. Attached below is a picture of the AAW wiper motor wires...
  2. 1967 through 1968 Mustang Parts For Sale
    I've collected parts over the years while preparing to re-assemble/restore my car. I've finally begun assembly now, and found I have some duplicate parts (all NEW parts), and as I complete the assembly, I have some good used parts that I no longer need, as I am replacing just about everything...
    $123,456 USD
  3. New Member Introductions
    Hey guys. I'm fixing up a 1967 Mustang (my first restomod) and I've run into an issue with my wiper motor connections. Does anyone have a diagram of the wires (The motor has a green, red, blue, white, & black ground)? There should be one park wire, one single speed, one double speed, & one...
  4. Vintage Mustang Forum
    Has anybody done a 1967 steering column shaft replacement? If so could you walk me through it?
  5. Vintage Mustang Forum
    September 9, 2023How does this motor sound for 600$? Thanks in advance.
  6. Vintage Mustang Forum
    I’m looking to rebuild my 289. I’ve got a couple questions, should I machine it? What should I look for to know if I should? I also was looking at a rebuild kit from my local shop and was wondering what you guys thought of it. Thanks in advance.- Ryder B
  7. Vintage Mustang Forum
    hello group, I have restored this here overhead console and plan on installing in a 1967 coupe that was not originally equipped with one. before i start cutting into this headliner, I suppose we should figure out the wiring. Ive included a picture of where i believe the existing wire for the...
  8. Vintage Mustang Forum
    Hello group, I love my 1967, but there are some interior pieces in 1965 that i cannot live without. one of them being the 1965 OEM steering wheel, painted grip, shiny spokes, good looking horn button. 1967 has some ok wood grain options too, hey the shelby one looks cool, $2000.00? is that it...
  9. Vintage Mustang Forum
    hello, does anyone know the correct paint for the dash metal/glovebox, inner door metal, inner quarter panels? this is not my car pictured, but is the interior of a 1967 brittany blue and its looking good. so far closest i can find is a duplicolor perfectmatch BFM0382, any suggestions? thank...
  10. Vintage Mustang Forum
    I have a 1967 Mustang 289 convertible. I am 95% sure it's the original convertible top as is the rest of the car! The rear window in the top is two split (horizontal) pieces of glass (I think it's glass). The 'gasket' or 'seal' or 'molding' BETWEEN the top and bottom pieces of glass is gone...
  11. Vintage Mustang Forum
    I read some older threads on this, but the site suggested I start a new one due to age. I have a 67 built in October, but it appears to have the solid "spear of death" steering shaft in it. What month did they start using the new 2 piece shaft with the rag joint? I'm looking to rebuild the...
  12. 1967 through 1968 Mustang Parts For Sale
    Nearing the end of the restoration for my 1967 Mustang, I have a yard of spare parts that need to go. I have two 1967 Fenders, two 1966 cabin wheel well covers, two 1967 doors, a 1967 steering column, two drum break covers, a 1967 trunk lid, two 1967 spring perches & two 1967 tie rods are for...
  13. Vintage Mustang Forum
    Gentlemen… When it comes to the 1967 Fastback, Ford created and sold 71,042 units (15% of sales that year). With that said, over 55 years of: rust, wrecks, fires, natural disasters and everything else has taken place over that time. With that said, how many originals do you think are left? How...
  14. Vintage Mustang Forum
    Hi folks, I was wondering if you can bear me some advice, I finally narrowed down the choice for headacheless headers that won't toast my 3rd MDL clutch cable. the setup is a '67 with a 302 and a T5. I preferred investing into the headers rather than a hydraulic setup just because of that nice...
  15. Engine, Drivetrain, and any other stuff For Sale
    Purchased for our Mustang project but we have decided to go a different route. The fuel tank was removed from the box and set in the project car. It never had any fuel added and was never bolted in. The wiring harness was never unboxed. Asking price / OBO + actual shipping cost 1 x Aeromotive...
    $1 USD
  16. Vintage Mustang Forum
    I’m doing some safety upgrade to my 67 that bought in April. I’m 21 so this is a bit of a change to me. I bought a metal divider that goes in between the trunk and backseat for safety in case I get rear ended due to the gas tank being back there; I am also about to purchase from disc brakes...
  17. Concours Forum
    Been trying to research but unable to find a straight answer. I have a 1967 mustang with a 289 2V exhaust, looking to find the hanger that holds the tail pipe at the very back right of the car. Trying if I can to match the original style and wanted to see if anyone can point me in the right...
  18. 1967 through 1968 Mustangs For Sale
    This car belongs to my best friend, Randy, who is in very poor health. He has heart trouble, diabetes, and is not long for this world. He's cash poor right now, and has decided to sell a Mustang that he inherited from his aunt. This car was her baby, and she took very good care of it, even...
    $20,000 USD
1-18 of 56 Results
Top