Ordered and installed a new comp cams gear and when I test fitted it on my motor the dizzy didn't go in all the way. I have the engine in a bare block still so I found that the gear bottoms out. Comparing it to the old gear it is lower as seen in the pictures.
Does anyone know of a composite...
I have a 1965 mustang that I bought. The motor was rebuilt but not finished. It has a 302 in it with an Erson TQ50H (E212223) cam. I looked on their website and this cam shows its for a 351/302 how do I know which firing order it is. Is it the 351 or the 302 firing order?
I recently purchased this 1969 Mach 1 M code, with a factory 3 speed manual and a 3:25 rear traction-lok rear axle, can anyone tell me how rare it is to find this axle on a small block car ? Or if it’s not rare at all, I seen A couple of R codes with the same rear axle
Here’s the marti report
WHAT YALL DOIN? DROP SOME PHOTOS! - MY PICS WILL COME ASAP
Extended (influenced) :sneaky: my quarters out ward about an inch each side to accommodate my diff width (rear end's out of a 69).
Removed rust (and prior repairs) on the bottom of the quarter panels towards the front of rear wheels...