Vintage Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-19 of 35 Results
  1. Vintage Mustang Forum
    Hello all! I am putting together my 69 inline 6 250 coupe. The trim and molding is kinda kicing my butt. I have the Chilton and the 5 book set, but neither have great instructions for this. The rear window molding (this black metal that goes around the window) seems to fit funny, and I dont have...
  2. Vintage Mustang Forum
    Anybody know where I can get one of these?
  3. Vintage Mustang Forum
    I currently have a 7.25 rear end behind a built 200 inline 6, my current gear ratio is 2.83 I believe and I’m looking to find a higher ratio for better acceleration. Let me know if where I can find a better ratio or if anyone has any that I can buy, thank you.
  4. Build Forum
    Hey guys! New to the forum and taking on my first restomod project... ever. So a little back story, my dad bought this Mustang for my mom with the intention of restoring it for her birthday. Well, he didn't and it's just been sitting in our backyard shop for the whole summer. Personally, I need...
  5. Vintage Mustang Forum
    I’m looking to rebuild my 289. I’ve got a couple questions, should I machine it? What should I look for to know if I should? I also was looking at a rebuild kit from my local shop and was wondering what you guys thought of it. Thanks in advance.- Ryder B
  6. Vintage Mustang Forum
    hello group, I have restored this here overhead console and plan on installing in a 1967 coupe that was not originally equipped with one. before i start cutting into this headliner, I suppose we should figure out the wiring. Ive included a picture of where i believe the existing wire for the...
  7. Vintage Mustang Forum
    I’m going to apologize in advance for not knowing what I am talking about. Went to start my car, battery was dead, somehow drained overnight. Removed the battery, charged it, hooked everything back up, and it started perfectly. I went to turn the car off, turned the key off but it did not turn...
  8. 1969 through 1970 Mustangs For Sale
    I have a 1969 302 Mustang for sale. Asking 8,000 obo It is the typical story, bought from someone who didn't have the time to finish it. Worked on it for a bit, then my wife and I had a kid, and now another is on the way so it is time to move on. The car is currently not working, because it...
    $8,000 USD
  9. Vintage Mustang Forum
    So does anyone notice the little red squares in the lens? Is this normal or is it just the camera This is in a 1970 mustang coupe
  10. Want Ads
    I am wanting the top piece of trim for the rear window on my 69 coupe Cheers
  11. Vintage Mustang Forum
    Hello friends, I just wondering if anybody had installed this suspension on 65-70 mustang from Ebay " 1964-1970 Ford Mercury Mustang II Power Front End Suspension Kit Stock Slotted " any recommendations ? I am looking at this suspension to install a 302 on it! but in around 1 or 2 years I do...
  12. Vintage Mustang Forum
    I’m looking to convert my manual drum brakes to disc brakes. Two questions. 1) I see two options; manual disc brakes and power disc brakes. I would assume the power disc brakes would be the way to go if I were to do a conversion? 2) Does anyone recommend a specific kit? I’m not looking to spend...
  13. Vintage Mustang Forum
    Hello, I'm new to the forum so please let me know if this post is in the wrong spot, or if the formatting is terrible. I'm also new to working on classic cars and have minimal experience I'm currently having an issue where my transmission on a 66 coupe will not shift into drive. It shifts into...
  14. Vintage Mustang Forum
    I’m doing some safety upgrade to my 67 that bought in April. I’m 21 so this is a bit of a change to me. I bought a metal divider that goes in between the trunk and backseat for safety in case I get rear ended due to the gas tank being back there; I am also about to purchase from disc brakes...
  15. 1967 through 1968 Mustangs For Sale
    This car belongs to my best friend, Randy, who is in very poor health. He has heart trouble, diabetes, and is not long for this world. He's cash poor right now, and has decided to sell a Mustang that he inherited from his aunt. This car was her baby, and she took very good care of it, even...
    $20,000 USD
  16. Mod and Custom Forum
    HI all, I'm considering adding sound deadener to my '66. Has anyone else done it and what do you think? Also, a kit for a 65-73 fastback is available cheap near me on Craigslist.... would that kit be worthwhile to pick up - or is it too different from the coupe version? Thanks in advance for...
  17. Vintage Mustang Forum
    So I’m going to be putting a 302 HO engine into my 1966 Mustang Coupe soon. I’ve asked various questions about this conversion in older topics, and I appreciate you guys’ patience with me! So I’m using a C4 transmission, and am having to get a new flex plate to go with said engine. Stock 24...
  18. Vintage Mustang Forum
    Hey everyone! Just here to see what you all think about some rim options i am thinking of for a medium blue 1970 mustang coupe. let me know what you guys think or if you have any suggestions. 1. 2. 3. 4. I like the black with the silver lip but also like the gunmetal color too. I put...
  19. Vintage Mustang Forum
    Hello, While i've got my engine out, i've been cleaning up the engine bay for a paint. In doing that, i've noticed that one of my strut rod brackets is cracked (as photo). Drivers side. From what i can tell, it is isolated to just this. Generally, the frame actually looks pretty clean. So...
1-19 of 35 Results
Top