Vintage Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-11 of 11 Results
  1. Wheel and Tire Forum
    Recommendations for a kit to convert the drums to disk brakes on my 65 convertible. I cannot find a kit that will keep the 4 lug setup with 14 inch wheels. Just got it running and am not looking to add too much to the expense side of the balance sheet for a while. Thoughts?
  2. Mod and Custom Forum
    Hi there, For the '66 that my dad worked on but I now have, he did the rear-end swap (and put in the 302) that I've seen some posts about. It was actually a '79 Lincoln Versailles, which I have come to learn was pretty much a re-badged Granada. But it does give the car 4 disc brakes. Dad also...
  3. Vintage Mustang Forum
    I’ll start by saying I’ve learned an incredible amount of information from this forum but I’ve seemed to hit a stopping point or lack there of! I’ve got a 1966 coupe that was originally four wheel drums. About three months ago I put a Leed front disc brake conversion kit with MC, brake booster...
  4. Mod and Custom Forum
    Hey so I'm looking into converting my 1968 mustang to 5 lug disk brakes and found this kit from POL that im considering getting. But I'm not 100% sure that they will work for my car. Most of the kits I've looked at are specifically for the V8 spindles so I'm not sure if this one would work. And...
  5. Want Ads
    On my 66 Mustang convertible, I changed my front brakes from drum to disk, unfortunately now the Swiss authorities won't let me re-expertise (MOT) my car with disk brakes, because it didn't arrive in Switzerland like that!! So I want to go back to drum brakes up front. I don't have the old...
  6. Vintage Mustang Forum
    Hi all - I am new to this forum and in actual fact new to the vintage car scene! I have a 1970 Ford Capri here in Australia which has a 289 Winsor with 9 inch diff and C4 Transmission. I have purchased the car site unseen from the North of Australia. Who I purchased it off does not know much...
  7. Vintage Mustang Forum
    Hello everyone, my name's Will and I'd love any help you guys have. I've just put wilwoods on my little straight six (it's nice to be able to stop!) but when the wheels are fully turned they scrape the rotors. I filed a few mill off in an attempt to fix that, but the rub is still there. I'm...
  8. 1967 through 1968 Mustang Parts For Sale
    I have a full disc/drum conversation kit for a 1968 mustang they worked fantastic a million times better than the original full drum brakes that were originally on the car. They have less than 200 miles on them and are all new with a new proportioning valve included. All brakes come with all new...
  9. Vintage Mustang Forum
    I am looking into putting a Wilwood Dynalite front disc conversion on my 65 coupe since right now it is 4 drum. I am keeping the rear drum, but am going to upgrade them a little bit in the process. I am also going to get the Wilwood dual bowl master and prop valve since I just have a single...
  10. Vintage Mustang Forum
    Hello from sunny and beautiful lock down Italy! I bench bled & reinstalled the cleaned and refurbished 1" bore m/c and bled the brakes and took my 69 Convt for a drive.......and so far no leaks :) In a "panic stop" situation the car does NOT stop quickly enough though. I cannot lock the...
  11. Vintage Mustang Forum
    I have a 1964.5 that had power drum brakes. I bought the four wheel power disk brake kit from CJ and got it installed. Bleed the system and the pedal goes to the floor. Bleed again same thing. Took off the master, bench bleed again, reinstall, pedal goes to the floor. I had a different master...
1-11 of 11 Results
Top