Vintage Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Vintage Mustang Forum
    Hello Gentlemen, I'll get straight to it regarding my scenario/ problem... Vehicle is a 66 Mustang coupe, 306 SBF, T5 (3.97 1st -i know), 4.11's, 24" front, 25.5" rear tires. For anyone that DRIVES their car with DISC/DISC... whether it be on the track, just around town, or even those...
  2. Vintage Mustang Forum
    Having an issue after swapping a 67 dual reservoir master cylinder on my 65. I have factory manual disc/drum on the 65, but the only options I saw for a 67 was manual drum/drum, or power disc/drum. I went with the power disc/drum (without adding a booster) assuming the MC won’t know if it has a...
  3. Vintage Mustang Forum
    Was planning on finishing my brake system today and started to bench bleed the master cylinder and on the second pump the rear cylinder bore was leaking quite a lot of brake fluid, at that point I thought it was bad so I pumped it a few more times anyway and then it stopped leaking. Is there any...
  4. Vintage Mustang Forum
    Can i use this Master Cylinder with my manual 4 wheel drum setup? Is there a difference between a drum Master Cylinder and a disc Master Cylinder? I have a 1967. Wilwood Brake Master Cylinder Tandem With Push Rod And 15/16" Bore 1965-1973 Thanks, Paul Edit: For those wondering why i would go...
  5. Vintage Mustang Forum
    I installed the JMC hydraulic clutch system in my 65 mustang about 16 years ago. During a recent restoration i left the master cylinder off the car without fluid for a year and it has broken. The inside is covered with rust colored goo and it no longer pumps fluid. The piston does travel in...
1-5 of 5 Results
Top