Vintage Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-12 of 12 Results
  1. Vintage Mustang Forum
    Hey guys, I recently picked up a rust free 70 fastback and have been trying to get it to turn over but am having some issues. When i turn my key nothing happens. It was in the process of a engine/trans swap to a 351c and c4 trans but seems to be unfinished. The previous owner bought it like...
  2. Vintage Mustang Forum
    I’ve got a 65 coupe with the 2bbl 289, manual. when I try to start it, the starter struggles to turn the motor and ultimately it won’t start. Battery tests at 12.6, I just replaced the battery cables and local auto part store tested the starter and says it’s in working order. Starter...
  3. Vintage Mustang Forum
    I've got a 65 coupe w/ the 289 and 4 speed. My starter is going out so I pulled it off but can't figure out what the right replacement part is. On the bell housing, I see D0OF-11131-A and on the housing I see 9 10 0 1 31 1 Any advice on what I should replace it with? I'd like to try to stay...
  4. Vintage Mustang Forum
    Hey guys, my 1967 mustang was starting and driving fine. I just drove it my my friend's place and after 30 mins the car would not start. I turn the key and try pumping the gas petal but the engine will turn and then cut out after maybe 2 seconds. The battery is new. Not sure what else could...
  5. Vintage Mustang Forum
    My first post is a doozy. 1965 Automatic All Original Transmission and Engine 6-Cylinder. Drove the car Thursday 14Apr2022. Parked in Garage. Changed Positive and Negative Battery terminal cables because they were corroded. Changed the cable from the Starter Solenoid to the Starter because...
  6. Vintage Mustang Forum
    I am having trouble getting the starter to actually catch the teeth on the fly wheel. It doesn't seem to be connecting and thus I am hearing the horrible sound. Any ideas about what starter I should be purchasing? Pics included in link
  7. Vintage Mustang Forum
    I have a 65 convertible that was left to me from my grandpa. I've am new to working on cars but am trying to get better. Somewhat often now, I go to start it and the whole thing seems to short out. The only way to fix it is to go and flip the battery disconnect to off, then back on again. I...
  8. Vintage Mustang Forum
    Hi all!! Thanks for all the past help!!! My 1966 6cyl Mustang has been in the garage until recently. I took it out a month ago for a 5 mile spin. No problems. Again a week ago. No problems. I went to take it out a few days ago and it turned over for a bit and then stopped and clicked. I...
  9. Vintage Mustang Forum
    My issue: I go to turn my key and my starter is not engaging. I just hear a click. I change the starter solenoid and the car fires right up! I drive it around all day running errands without a problem. During the day I turned it on and off 5-6 times and each time I would turn the key it would...
  10. Vintage Mustang Forum
    Anyone have any idea why my starter motor bendix gear won’t line up with my flywheel teeth? They are fine front to back but are not close enough together to mesh properly. It is a rebuilt OEM starter motor, and a JEGS brand flywheel (15.503” diameter/ 184 teeth). Original block (390), original...
  11. New Member Introductions
    So my car has been sitting for about a year and I finally got some cash together to get her running again. I bought the flex plate as well as a new starter. Starter was going out and fleznplaye was missing slot of teeth. Anyways I've watched a bunch of videos and think I can tackle it, but I've...
  12. Vintage Mustang Forum
    I’ve replaced the starter, starter solenoid and ignition switch still getting nothing. If I bypass the solenoid it will fire up. Brand new battery I’ve tried going from park to neutral still nothing. Any info would help! Thanks, I’ve also checked all ground wires they seem to be fine
1-12 of 12 Results
Top