Vintage Mustang Forums banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-13 of 13 Results
  1. Vintage Mustang Forum
    hey there vintage-mustang I have been doing a lot of reading here and after searching and searching decided to hop in and make a post. I'm starting the build process on my 68 coupe after being out of the Mustang world for years. It's my first car that I built with my father 16+ years ago and it...
  2. Vintage Mustang Forum
    I’m working to replace my cracked original steering wheel and upon removing it, found this. Is something supposed to be in this red circled wire area? Currently, it’s just exposed wires. Is anything else missing here? This is exactly what I see when removing the steering wheel. Horn doesn’t work...
  3. Vintage Mustang Forum
    Hello. Does anyone else have trouble tightening the pitman arm to centerlink boot for power steering? At a certain point the joint inside the centerlink just spins and you can’t tighten any further
  4. Vintage Mustang Forum
    Hi all, Have a rather complex situation going on. First I’ll start with the backstory. I took the car in for an alignment to a local shop that has a good rep among classic car owners. When I picked it up after the alignment tech said he pulled it into specs but wasn’t happy with it. Said...
  5. Vintage Mustang Forum
    Hi all, I need the size for the nut that connects the power cylinder to the center link. Just pulled mine and the threads were ruined.
  6. Vintage Mustang Forum
    Hey all, I Just replaced the power steering slave cylinder, control valve and hoses on my 1967 390FE, now I keep loosing the power steering, I have bled it numerous times, and it is great for a while then.... well you know... Im not loosing fluid. I never had any issue prior to changing the...
  7. Vintage Mustang Forum
    I have a 65 coupe with a 91 5.0 and T5 in it with a Canton 7 quart RR oil pan. It worked great until recently when I freshened up the steering with some Shelby style pitman and idler arms. Now the center link is rubbing on the oil pan very hard except when the steering is centered. The motor is...
  8. Vintage Mustang Forum
    Hello everybody. I'm restoring a 68 mustang and it's being really hard to find some parts in my country (El Salvador). Today I was offer some parts of a mercury comet and I need to know if are the same or similar. The parts are: Spindles Strut rods Upper and lower control arms. Center link...
  9. Vintage Mustang Forum
    Only when turning left (not right), there is a "thumping" or dulled clunking that increases in frequency the faster the car is moving. I jacked up the front, turned the wheel left and spun the front wheel, but didn't hear anything. 65 Mustang 200 six cylinder coupe, with C4 auto trans. Disc...
  10. Vintage Mustang Forum
    Should I have my 1965 Mustang steering box w/85k miles rebuilt before installing the new engine?
  11. Vintage Mustang Forum
    I looked through the past posts but can’t really find what I’m looking for. I’m trying to disassemble my tilt away column for repainting and cleaning. Looks like a lot of brake fluid has been spilled on it and really did a number on the bottom half of the housing. Once I started taking it...
  12. Vintage Mustang Forum
    I know I could have bought a new one, it's not easy getting stuff here in the UK, plus I like fixing up old stuff ?
  13. Vintage Mustang Forum
    Hi everyone, I drive a '65 Mustang 289 with the original power steering system. As I was slowly turning the steering wheel while backing out of a parking spot yesterday, I heard a pop and my steering went stiff. I can still turn, but with a lot of effort and a lot of squealing -- the type of...
1-13 of 13 Results
Top