Vintage Mustang Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
194 Posts
Discussion Starter #1
As if it is not said enough and we all don’t already know. Measure twice (or more) and cut once. After doing a test fit of the fender flare and seeing that it was real close, but not correct, I got antsy and trimmed back the factory metal. Well, I gave myself 3/4 inch for overlap and the panel ended up being moved 1/2 inch to fit correctly, leaving me with 1/4 inch to spare. Now I am going to have to run about a 2 ft long strip of body filler 1/2 inch tall and 1/16 deep. It will be backed up by metal so I guess it could be worse. Remember; don’t get in a hurry with the cuts.
JH
 
1 - 1 of 1 Posts
Top