Vintage Mustang Forums banner
  • Hey everyone! Enter your ride HERE to be a part MAY's Ride of the Month Challenge!

1 - 4 of 4 Posts

·
Registered
Joined
·
1,355 Posts
Discussion Starter · #1 ·
I just wanted to show you my new Powermaster 100amp alternator. It was a pretty simple install no problems. My lights and dash lights are brighter.
http://www.louiswrites.com/mustang/images/Picture110.jpg
This is my new radiator setup that I am gonna install this weekend. It's a griffin univeral 22 x 19 radiator. I made my own custom fan shroud. It gonna use a 16inch high performance Spal fan.

http://www.louiswrites.com/mustang/images/Picture111.jpg

I can't wait to install it.

David
 

·
Registered
Joined
·
6,782 Posts
Dave,

Expand on your radiator shroud construction, please. What are the black thingies at the bottom of the pic? How did you attach the shroud to the radiator?, etc.
I am right behind you in that area as I've got a new Spal fan forthcoming from StreetorTrack.com. I do have a little different setup, as I am running the AFCO radiator.
 

·
Registered
Joined
·
1,355 Posts
Discussion Starter · #4 ·
Well the little black things on the bottom are flaps to let access air out. Since I am gonna be running a Spal fan I needed to have them.

For how I mounted the shroud is that I made a little bracket on the bottom and welded it to bottom of the radiator. Then for the top I decided to drill 2 holes and put 2 allen head screws there for a tight fit. This shround came out a great for my first welding experience with aluminum. Hey if you want anymore pictures or anything let me know

David
 
1 - 4 of 4 Posts
Top