Vintage Mustang Forums banner

1967 Mustang Fastback project

3388 Views 2 Replies 2 Participants Last post by  drcougar
67 Fastback project car. Was a father son project, but son ran out of money! Originally a 289-2V with 3 speed manual. Car is currently a rolling shell. Body in decent shape, small rust holes in rear quarters, Trunk floor real good. Needs partial floor work but they are not completely gone. Frame rails all in good shape. We have a set of American Designer full floors that go with car. Needs battery apron and core support due to some light front damage. Have new hood and trunk lid from Scott Drake Mustang. Have NOS left front extension and unbroken used right front extension. Fenders need some work but have no rust. Needs grille pieces and front bumper. Interior pieces in decent shape, but needs front seats. Has a good running 289-2V motor and automatic trans. Car was originally light green in color (now yellow) and has black interior. Car is located near Tacoma, Washington. We are just trying to recoup our money on this so rather than asking way too much and coming down our bottom line is $5000. Call for additional information. We have digital pictures but please request them only if you are interested. No picture collectors!! You can email or call for additional information. (253) 863-5669 - John.
1 - 3 of 3 Posts
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.