Vintage Mustang Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
6,838 Posts
Discussion Starter #1
1967 Shelby GT-350 Fastback (clone) 289 4spd car originally with original red interior in very good condition. The car has almost $6,000 worth of Shelby parts to make the clone. It has a used patina that makes everybody think that it is real. It could use a stronger engine and floor pans to be really nice.

$16,750.00 [email protected]


Shelby Parts List

1 1967 SHELBY TAILLIGHT FRAMES: Aluminum trim that frames taillight lens; comes with Mounting Hardware; Sold in pairs only Cost: $119.95
1 1967 SHELBY TAILLIGHT BOX HOUSINGS: Left and Right metal housing with 3 large holes on each side; also supports taillight panel. Taillight bodys bolt through these. Original equipment on all ‘67 Shelbys. Sold per pair Cost: $84.95


1967 SHELBY HOOD, STYLE A: Exact duplicate of the original; without louvers Cost: $479.95
1967 SHELBY NOSE: Deluxe, with studs for mounting installed Cost: $594.95
1967 SHELBY LOWER RIGHT SIDE SCOOP: Functional type, covers lower vents. Includes ducting flange Cost: $68.95
1967 SHELBY LOWER LEFT SIDE SCOOP: Functional type, covers lower vents. Includes ducting flange Cost: $68.95
1967 SHELBY UPPER LEFT SIDE SCOOP: Fiberglass Cost: $94.95
1967 SHELBY UPPER RIGHT SIDE SCOOP: Fiberglass Cost: $94.95
1967 SHELBY REAR TAILLIGHT PANEL: Fiberglass Cost: $124.95
1967 SHELBY FASTBACK TRUNK LID: Fiberglass Cost: $344.95
1967 SHELBY SPOILER RIGHT END CAP: Fiberglass Cost: $69.95
1967 SHELBY SPOILER LEFT END CAP: Fiberglass Cost: $69.95

1967 SHELBY GENUINE WOOD STEERING WHEEL: Package price. 15" Diameter with 1-1/2" dished frame with polished laminated mahogany wood and polished spokes. Also, fits Cobra kit cars with (GM) General Motors steering columns. Complete kit includes: steering wheel, hub, and center horn button with emblem, perfect for the Shelby look-a-like! NOTE: Tilt-Wheel cars will require modifications to hub! Please indicate emblem & Hub style. By LACARRA (FORD & GM) Cost: $249.95

1967 SHELBY G.T. 350 SIDE STRIPE KIT "WHITE": Will do both sides of your Car. Price Per Kit Cost: $29.95
2 1967 SHELBY "Exact Reproduction" TAILLIGHT LENS Price each Cost: $89.95
1967 SHELBY 15" X 7" 10-SPOKE ALUMINUM WHEELS "PACKAGE DEAL": Includes;"4" 10-Spoke Aluminum Wheels, "4" Correct Center Cap with Emblem and "20" Correct Long Chrome Lug Nuts. Price Per "Set of 4" *Note: Currently being Reproduced to Carroll Shelby’s Specifications. Cost: $998.95
1967 SHELBY 'COBRA' SMALL BLOCK ALUMINUM VALVE COVERS "260-289-302 ENGINES": ‘Powered by Ford’ finned aluminum solid-letter type, black krinkle-finish with polished letter's and fins. Cost: $109.95

1967 SHELBY OVAL AIR CLEANER ASSEMBLY "CONCOURS CORRECT COMPLETE ASSEMBLE": Includes top, filter, bottom, and mounting hardware: Top - COBRA NAME W/BLACK KRINKLE FINISH Bottom Cost: $114.95

You can click this link to see an assortment of pictures

http://www.clubhotrod.com/photopost/showphoto.php?photo=1109&papass=&sort=1&thecat=500
 

·
Registered
Joined
·
9,780 Posts
Dear Newbie: Please allow me to be the first to ask; what is your location? How about a vin #, what color is the car now? how many miles?
Thank you
 

·
Registered
Joined
·
6,838 Posts
Discussion Starter #3
I'm trying to figure out how to post a pic to the add! I'm in Columbus Ohio. Car has 138k original miles.
 

·
Registered
Joined
·
223 Posts
What are the other Shelby parts on the car that would add up to $6000? The parts you listed come to approx.$3782.00 Thanks, Mike
 

·
Registered
Joined
·
223 Posts
Not trying to give you a hard time, just wondering if there are more valuable Shelby parts on the car. Thanks again, Mike
 
1 - 5 of 5 Posts
Top