Vintage Mustang Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
22,189 Posts
You will need pushrods for 78 to mid 80's 302/5.0 with flat tappet cam. You will also need inserts on the end of the head to seal off the Thermactor port. They're cheap. That's about it. You will loose some compression but the added flow should more then offset that.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top