Vintage Mustang Forums banner

1970 Ignition Switch Connector Pic Needed

2K views 2 replies 3 participants last post by  classicmach1 
#1 ·
Can anyone shoot me a picture of the ignition switch connector on a 1970 Mustang under-dash wiring harness? It's a rectangular connector with 7 female sockets.

I've found a few sources that sell a brand new ignition switch for '70 Mustangs. The wiring harness on all of them is shorter than the OEM switch; I don't yet know if that's a problem or not. I also noticed that the original switch has one or two male plugs that are thicker than the others while on some of the new switches the male plugs are all the same smaller size. I'm trying to determine if that's a problem and I need to see what the female end of this looks like to be sure.

Please post pic here or ping me via email or PT for my email address. If this works out I'll gladly share what I find.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top