I want to add head rests to my seats.
Does anyone have experience finding headrests and mounting hardware for ’68 standard low back seats. NPD and CJP have different headrests for 65-67 (two post) and 69 (one post). Which would be correct?
I had to replace my flywheel on a 1968 390 HiPo with a toploader. Decided to swap the clutch, pressure plate and throw out bearing while I had the transmission pulled. Everything went back together fine but I'm having a crazy time getting the clutch adjusted.
When I adjust to get the 1/2"...
The new holes have a lip where they do not go through all the layers of metal in the shock tower, so it is not flat where the lock washer sits.
Do I use a flat washer or not worry about it?
Im ready to reinstall today.
I'm new here and wanted to get advice on where to get a simple engine cradle or stand that would fit a 390. I'm not building the engine myself so it doesn't need to be elaborate. The main purpose is to get the engine onto a stand that can be used to store and transport the engine...