302 in a 68 fastback with trick flow heads. I've had to tighten down the header bolts 2 times already and I can't get a socket around some of them because they are too close to the pipes. Any tricks or special wrenches that I can get?
My 69 just has the regular rear light units with one bulb in each. My wiring is very slightly modified to not have them flash as indicators and they just work as night lights and brake lights.
I have often wondered about how good the rear brake lights are during the day, especially on a very...
Howdy. My car had traction bars that the previous owner installed. I don’t plan on drag racing or taking off hard, so apart from what a traction bar is supposed to do, am I giving anything up by removing them?
1967 Coupe | 351 4 speed MT
Does anyone have any advice for telling a set of 1967 door speaker grilles from the Scott Drake knockoffs other than assumptions of their age based on their condition?
Are their materials different?
I've never seen a set in person off of a car.
I put a T5 in my 68 289 with 8” rear diff about a month ago. I had the driveshaft shortened, new u-joint and balanced. Car ran great, nice and smooth.
I then swapped the 2.79 open 3rd member with a 3.55 LS Yukon. I pulled the rear wheels off, rear brake drums, slide the axles out, remove...