Vintage Mustang Forums banner

1 - 6 of 6 Posts
G

·
Guest
Joined
·
0 Posts
Discussion Starter #1
I'm considering putting a pair in my 65 fastback. I checked my local dismantlers without any luck. Anyone have any ideas?

Thanks-
Craig
 

·
Registered
Joined
·
2,204 Posts
Dare I say you can probably get a clean passenger seat from a junk yard, but I'm betting that the driver seat will need to be cleaned and disinfected (at least).
 

·
Registered
Joined
·
477 Posts
Craig,
Be fore warned that the 2001 seats (I believe 98 to presents seats) are a tad tricky to install. The bottoms are not "flat" like the Fox style seats. If you are going to use your original tracks, or aftermarket tracks, you will need to fab up a spacer/adater. Also the seat bottoms are different from drivers to passenger side, so don't make a pair of spacers/adapters off only 1 seat. You only wind up throwing the piece you just spent hours making across the garage after you pull off the plastic the seat was shipped in and realize the difference. Not that I am talking from experience or anything :: ::

Let me know if you want some pics of what the seats look like installed
 
1 - 6 of 6 Posts
Top