Vintage Mustang Forums banner

351 C Questions

495 Views 4 Replies 3 Participants Last post by  Guest
Hey guys I am trying to rap up the engine and finish up and prepare for paint. Now Im about ready to put the manifold back on and I was wandering if in the valley under the manifold do I need to put any oil or anything in there because I wiped it all down and cleaned it up or will the oil make its way there when I fill the car up with oil when its back in the engine compartment. And then the other question is i just put the front timing chain cover on and I was wandering how you put this darn bearing in that is around the blancer shaft. I just cant get it in there. So thanks guys.

1 - 1 of 5 Posts
Every bit of the oil draining back from the heads will pass thru the valley.....

Most people tap the crank seal into the timing cover before they ever mount the cover.
1 - 1 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.