Vintage Mustang Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter #1
Can anyone help I am trying to figure out what I need. I currently have a 351w (from a 91 crown vic) with the orginal C4 from 66. I am putting in a T5. I am not sure what I need for a flywheel 157 or 164, 28oz or 50oz? Will a flywheel from a 5.0 work, can I use the block plate from the 66. I want to put in a stock clutch from a 91 stang and the late model T5 bellhousing. What about the pilot bearing does that need changing any help would be great.
 

·
Registered
Joined
·
20,998 Posts
All 351W's use 28 oz balance. There are many options as far as flywheels/bellhousing & clutch set ups. I'd reccomend to check out 2bav8's web page. Tons of great info!
 
1 - 2 of 2 Posts
Top