G
Guest
·Guest
Joined
·
0 Posts
if i change from a 6cylinder to a windsor what do i actually got change? i know the engine mounts, fan, fan shroud, and radiator! do i change transmissions and etc? thanks a bunch!
6 to 8
Join the discussion
Recommended Reading
-
Are these Headers still good?
Vintage Mustang ForumI'm in the process of converting my 65 auto to a manual and along the way I had to remove the headers to get the C-4 out and install and set up the equalizer bar. Now I'm ready to put them back in but I noticed the flanges have cracks where the bolts go thorough... Am I okay to re-install and...- 1
- 31
-
xela.zue · updated
-
Brake conversion: 4 lug to 5 lug
Vintage Mustang ForumAny thoughts about keeping 4 lug or changing it to 5 lug? And any recommendation where to buy them?- 1
- 57
-
KC66 · updated
-
Why am I getting a draft coming through my steering column on my 1967 Mustang?
Vintage Mustang ForumHey guys, I recently had to replace my column when I upgraded to the Borgeson steering box on my 1967 Mustang. Everything went in smoothly and works fantastic. But - I've noticed a draft coming from the column right where the steering column brace wraps around the column. See pic. Why am I...- 4
- 120
-
Got my T5!
Vintage Mustang ForumWell after lots of searching, want adds, bartering, "horse trading" I finally have a T5 to put in my car. I'm into it for $150 CAD ($110 USD) From all the research I did this will work fine for my "stockish" Sunday driver car. 1968 mustang 289, 3 speed. I will use my existing clutch and...- 37
- 666
-
Stangfire · updated
-
Carb issue (maybe?)
Vintage Mustang ForumHello there, My 66 289 2bbl has become hard to start. Tried starter fluid but no help. Once it does start, it will idle rough for a minute and then just shut down. In looking at the carb, I noticed the plate is always open and has a range of just about an inch. (See pic, that is as closed as it...- 1
- 71
Join now to ask and comment!