Vintage Mustang Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
280 Posts
Discussion Starter #1
I've been working on a 65 with a 289 4Bl and C4 trans for a while. I've gotten to the point of setting up the Throttle and Kickdown linkages. I know how to set up the throttle (even though I dont have all the parts for it), but Im not sure how to set up the kickdown. I know how it attaches to the Intake but im at a loss as to how to attach it to the Trans so that it acctually does something. Ive seen a lot of diagrams on how to set it up but none of them have shown how to hook it up to the trans.:) Any help would be appreciated. Thanks.
 

Attachments

·
Registered
Joined
·
35,836 Posts
The lever on the long shaft attaches to the small, flat-sided threaded shaft sticking out the center of the transmission select lever.

 

·
Premium Member
Joined
·
4,935 Posts
It looks like from your picture that you have what you need,
it only goes on one way, one way is right the other would be
180 out and won't fit.
 
1 - 4 of 4 Posts
Top