Vintage Mustang Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
369 Posts
Discussion Starter #1
Does anybody know what feeds the brakelight switch?My brakelights do not work ,but everything
else does,turn signals,emergency flashers.Im not getting any voltage to the brakelight switch itself.
Where do I start?? thanks as always
 

·
Registered
Joined
·
4,747 Posts
Check the fuse box for a blown fuse, then start ohming out the wires if the fuse is good.
 

·
Registered
Joined
·
884 Posts
Start with the bulbs. Don't look at them, test them, Ones that look good can be bad.

Then get out the voltmeter and apply basic 101 electrics. Start with hot wiring the switch.

Good luck.
 

·
Registered
Joined
·
3,628 Posts
don't have '66 scematic handy but '68s get power for horn and brakelights from circuit breaker in headlight switch. if you don't find your problem send me PM and i will dig '66 schematic out and help you.
 
1 - 5 of 5 Posts
Top