G
Guest
·Guest
Joined
·
0 Posts
The PO on my '66 did the drum-to-disc conversion but did not convert to a dual master cylinder. What is involved in making this mod?
'66 dual brake master cylinder
1 - 3 of 3 Posts
Joined
·
16,014 Posts
Using Search for "dual master cylinder" just one of the results
Dual Master Cylinder
[email protected]
1967 351W Convertible
2000 Mustang GT
Dual Master Cylinder
[email protected]
1967 351W Convertible
2000 Mustang GT
G
Guest
·Guest
Joined
·
0 Posts
I am going to change the master on my 65 GT also and have been told the 74 maverick will swap. I believe the fittings are 1/4 instead of 3/16. Hope this helps. Denny
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Door scuff plate stainless screw corrosion
Vintage Mustang ForumI pulled my factory original aluminum door scuff plates off and found some significant corrosion around each of the screw holes. I find it interesting that Ford used stainless fasteners for an aluminum plate when stainless is known to corrode aluminum. Maybe that wasn't well known back then...- 11
- 203
-
Improve traction
Vintage Mustang ForumSo what options do i have for improving the traction at the rear wheels? The car is a 65 mustang with a open 8" rear end. I know this sets som limits to how good the traction can be, but it really has no traction at all. If the ground is just a little wet, the car will just spin the tires with...- 2
- 23
-
Safe place to buy Champion radiator?
Vintage Mustang ForumI’ve been making a lot of changes to my cooling system recently, and I’ve noticed that lots of people have been recommending the champion radiators. I have someone who would buy my relatively new 20” for almost purchasing price, and so I am interested in picking up a 24” champion since the...- 7
- 124
-
AustinE · updated
-
She will be off to paint by August So do I keep the same color or change it.
Vintage Mustang ForumMy next step is paint. Now do I keep the black factory color was Raven Black. The repaint was Earl Schibe gloss black. What color is yours and do you have a favorite color? .- 5
- 96
-
Street or Track Lower ball joint covers split
Vintage Mustang ForumHey everyone! I know there are a lot of us that run Shawns awesome products. Both of my boots are split on both sides with about 1500 miles on them. Anyone else run into this issue? Too, what’s the easiest way to replace the boots without tearing the whole front end apart again? Thanks!! Chris- 11
- 168
-
Badbenz94 · updated
Join now to ask and comment!