Vintage Mustang Forums banner
  • Hey everyone! Enter your ride HERE to be a part MAY's Ride of the Month Challenge!

1 - 5 of 5 Posts

·
Registered
Joined
·
833 Posts
Discussion Starter · #1 ·
I've gotten to the point where I need to paint the glove box door of my '66.
I've used paint stripper to remove all of the old paint and it's ready to be painted.
How did everyone mask the door?
The outer portions are relatively easy, but the small raised portion on the inside looks to be a real time-consumer.
 

·
Premium Member
Joined
·
6,359 Posts
Blue or green painter's masking tape, you can use an Xacto blade to carve details very carefully.
 

·
Registered
Joined
·
532 Posts
You can also use a paste wax. Put it on. Let it dry (remove any excess). Paint. Let it dry. Wipe off the wax/paint.
 
1 - 5 of 5 Posts
Top