are 67-8 hinges the same as 69-70?
[email protected]
[color:green]www.ang67must.com</font color=green>
[email protected]
[color:green]www.ang67must.com</font color=green>
67-8 hood hinges
1 - 3 of 3 Posts
G
Guest
·Guest
Joined
·
0 Posts
According to my interchange manual '64 1/2 -'70 are all the same except GT 350 & 500
"I feel the need..The need for speed"
"Gotta Go,... Gotta Go"
" Think long,Think Wrong!"
Bryan
'68 Acapulco Blue 289 Coupe
'91 Ford Escort GT
'91 Ford Escort LX 5dr (Wife's)
"I feel the need..The need for speed"
"Gotta Go,... Gotta Go"
" Think long,Think Wrong!"
Bryan
'68 Acapulco Blue 289 Coupe
'91 Ford Escort GT
'91 Ford Escort LX 5dr (Wife's)
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
Too hot to work on the Mustang, so I improvised.
Vintage Mustang ForumIt’s about 100 degrees here in sunny North Texas. Feels even hotter. We’ve got too much to do on my daughter’s car, so it’s time to get creative. I would have gotten a single larger unit, but my in-laws had these two 5,000btu units new in the box, so I’m giving them a test drive. After an hour...- 35
- 835
-
BlakeTX · updated
-
Vacuum Canister Alternatives for 1968 with Factory Air
Vintage Mustang ForumGuys, I need a vacuum canister for my 68 fastback with factory air. I can't get a hold of Classic Auto Air to find out if they have any in stock and when it would ship. I'm close to getting my A/C up and running again. So, my options; 1. An alternative that would fit the hole in the...- 0
- 0
-
Leaf Springs; what we know about them, and what we don't
Vintage Mustang ForumAnother recent thread is prompting this. I was trying to do some fact-finding about who makes them, where they are made, and what they are made of. The information does not seem as readily available as I had hoped. I know Eaton Detroit is the big domestic U.S. manufacturer, and they proudly tout...- 97
- 8K
-
4ocious · updated
-
Ready to buy GT40P: What to look for?
Vintage Mustang ForumI've read every GT40P engine swap thread for the past year and almost bought one during the Winter but life got in the way. Now I'm back on track to make it happen. I hope to get some advice from those with experience with junkyard engines. I plan to buy from Triangle Auto Recyclers in Durham...- 0
- 0
-
74Rallye · updated
-
Rear ride height
Vintage Mustang ForumHi, my '66 coupe rear ride height is about 3/8" uneven. It was just like this when i got the car, and now with my new 4.5 mid eye leafs and new shock, its lower but still 3/8" uneven. Ill take some more mesurements but i assume that its possible that the frame had flexed a bit with all those...- 12
- 95
-
drzmat · updated
Join now to ask and comment!