G
Guest
·Guest
Joined
·
0 Posts
Do both the 67-8 trap doors have the metal trim piece at the top? I was thinking the 67-8's did and 69-70 had a very similar trap door but without that trim. Please help clear this up for me. Thanks...
67-8 Trap Door
Join the discussion
Recommended Reading
-
Spark Plugs Fouled, Weak Acceleration
Vintage Mustang ForumHi Guys, I drove my car yesterday. It accelerated poorly and had a very noticeable vibration on acceleration, coming all the way through the steering. It was totally fine last week. The fuel mixture was richened recently as the weather has cooled but the car drove fine until yesterday. It was...- 4
- 95
-
umangu · updated
-
Just how good should my brakes be ?
Vintage Mustang Forum65 Convertible disc/drum setup ,just had new dual reservoir m/c and booster installed , new rotors and calipers and lines ,new wheel cylinders and shoes on the back. Struggling with long peddle travel and soft stopping. Have bled several times and adjusted the rear brakes as much as my mechanic...- 98
- 3K
-
rtate · updated
-
Electrical gremlins are out to get me I think.
Vintage Mustang ForumSo I did a little cleaning on the engine bay today. This included taking off oil pressure gauge line to oil pressure sending unit and cleaning it. Put it back on and now gauge does not read correctly. Car has new sending unit. Any ideas? I made sure fitting is snug against sending unit. I do...- 6
- 145
-
jperls · updated
-
I made another video: how to mix and spread body filler
Vintage Mustang ForumI see too many pictures of bondo that are way too red (or blue for polyester fillers). Was doing some filler work tonight so decided to make a quick vid that might be helpful to others.- 0
- 0
-
Lizer · updated
-
Need Toploader Heaven CD. HELP!
Vintage Mustang ForumHi All. I'm ready to tear into my 64 top loader. I have the master rebuild kit in hand and the tranny on the work bench. I read the Dan Williams instructions but I think I really need the Toploader Heaven CD. Anyone have one or a link to the info or a pdf of the printed instructions? HELP...- 0
- 0
Join now to ask and comment!