Vintage Mustang Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
1,376 Posts
Discussion Starter #1
Can some body give me the sizes for the side stripes for a 67 GT .

1 .Distance up from the bottom or the door

2. Width of frist stripe

3. Width of first gap

4. Width of middle stripe

5. Width of gap

6. Width of top stripe

Spaceing of the area around the GT badge .
 

·
Moderator
Joined
·
4,128 Posts
390 gave you some good info. But as they say a picture is worth a 1000 words, so here is 1k of words. /forums/images/icons/tongue.gif fd

http://a9.cpimg.com/image/D1/B4/11147729-1793-020000C5-.jpg
 

·
Registered
Joined
·
1,376 Posts
Discussion Starter #5
Thanks for that . Just to confirm 4 5/16 is the distance from the back edge of the (guard)fender forward to where it stops for the badge cut ,right ??
and the 3/8 is what ? distance from the (sill mould )rocker panel mould to the bottom stripe or the distance from the end of the stripe to the start of the "T " cross piece ????
 
1 - 5 of 5 Posts
Top