G
Guest
·Guest
Joined
·
0 Posts
Does anybody know the difference between a 67 tilt turn signal switch and any other?68-69 are more common,will these fit?Any info would help.Thanks
67 tilt switch
Join the discussion
Recommended Reading
-
Electric fan and controls for 67 with 20” radiator
Vintage Mustang ForumI’m caving in and finally switching from an engine driven fan to an electric fan for my 67 with a 20” champion rad. The flex-a-lite 398 syclone seems like a decent choice from what I’ve seen, but I’m open to alternative suggestions. I’m seeing a lot of conflict regarding the reliability of the...- 1
- 53
-
AustinE · updated
-
4 lug Scarebird disc brakes
Vintage Mustang ForumHell, Just wondering if anyone on this site uses or have used Scarebird disc brake conversion on their 6 cylinder Mustang. I am thinking of doing this, but have questions about if the stock 14 inch steel wheels will clear the calipers. The Scarebird site states if the offset is more than 3...- 20
- 294
-
A/C Console Hardware
Vintage Mustang ForumI have bought and redone an original A/C console for my '66 coupe. I have the 6 screws that mount the plastic base. I need the 2 screws for the end cap and 1 for the shifter plate. I bought a pack of #8 3/8" screws and currently using one for the shifter plate. Different head but works. I have...- 2
- 84
-
Subframe connector installation question
Vintage Mustang ForumI’m going to get them welded on but have a bolt-on kit I’m installing right now. The rear is supposed to attach via a threaded hole on the rear subframe. Due to being 50 years old I assume, the holes don’t align between the connector and subframe. The subframe hole is shifted about 1/2” towards...- 9
- 336
-
Brake booster question, which one?
Vintage Mustang ForumI was going to stay manual brakes but since my engine is out and I am adding borgeson steering I've decided to go with power brakes. Up front I have Wilwood discs and on the rear I have 2003 Cobra disc brakes mounted to Mustang Steve brackets. I also have a Wilwood adjustable proportioning...- 1
- 74
-
mikec35 · updated
Join now to ask and comment!