'69 Boss2 mouse, R/C car, 64 1/4 R/C
1 - 6 of 6 Posts
Joined
·
6,911 Posts
They must have just released the r/c boss 302....I WANT IT!!!!!!!!!!!!!!!
So far a websearch for vendors is coming up squat /forums/images/icons/frown.gif
So far a websearch for vendors is coming up squat /forums/images/icons/frown.gif
Joined
·
291 Posts
I just called their customer service department. She told me these would not be available until late summer, but she took my email address and said she would notify me when they came out and where I could purchase.
1 - 6 of 6 Posts
Join the discussion
Recommended Reading
-
heading to the dyno on Sat...
Vintage Mustang ForumSo I'm taking the 66 to the dyno on saturday. Old guy, neighbor of my uncle who's been tuning cars all his life. He wants me to bring my Holley 600 CFM carb and my Summit 500 cfm carb and see which one is better. Since I've never done anything like this before is there anything I should be on...- 8
- 109
-
ophthos · updated
-
I6 to 8” brake upgrade
Vintage Mustang ForumI’m taking a slow road to a V8 upgrade eventually in a 65 FB. I’ve got a 66 8” I’m ready to install but it doesn’t have a brake line on it. I figure I should get a new line, but there was a block on the left of the 4 bolt - what part is that? Off the block is the feed from the front of the...- 5
- 118
-
can a hotter plug cause a miss
Vintage Mustang Forumrunning 1 step hotter plug have small 100 RPM miss "ONLY" between 1800 and 2100 RPM pretty much ruled everything else out. can a hotter plug cause this- 4
- 113
-
Blues Power · updated
-
AC Condensor Testing--How Much PSI should be used.
Vintage Mustang ForumRedoing the 65 engine compartment and discovered I had no R12 left in the AC system. Part of chasing down the leak is I can test the condensor now that it's nearly ready to lift out. I can pressure it up to test for leaks once its out but I don't know how much pressure it normally operates on...- 18
- 238
-
A CLASSIC job gone haywire
Vintage Mustang ForumMy hydraulic clutch master screwed up the last time I used the car and barely got it in the garage for the winter before it died. Since they are offset from the hole in the pedal, they do tend to go out, I learn by reading posts that after about 4k miles they die, unless you get the Modern...- 27
- 2K
-
dobrostang · updated
Join now to ask and comment!