Vintage Mustang Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
776 Posts
Discussion Starter #1
ok, im very on the fence on this but have another 69 fastback thats being built and not enough time. so here it goes. Ill post pictures from my phone shortly. Located in Lubbock, TX $23,500 OBO

• 351w with Edelbrock Performer RPM intake and heads. Heads have 2.02 intake valve and springs have been set up for roller cams.
• CompCams roller cam with roller lifters w/ link bars.
• Borgeson power steering.
• Power brakes: disc fronts/drums rears. EBC red pads up front. All brakes rebuilt in 2015. Pads 2018
• 1” Sway bar, new lower control arms, uppers have new ball joints. Lowering front springs. New rear leafs in 2014.
• New inner/outer tie rods.
• Global West Adjustable Strut Rods.
• Koni Strt shocks front and back.
• Export brace and full length subframe connectors.
• 24” Champion aluminum radiator w/ dual electric fans, Flex-o-lite fancontroller (Fans Currently regulated by fitech.
• H4 headlight relay kit and conversion.
• Fitech Mean Street 800hp EFI conversion. Spectra EFI fuel tank.
• MSD distributor and MSD 6AL box.
• Custom TMI interior.
• Power top with new hydraulic lines and cylinders.
• Custom LED tail lights.
• Rebuilt Posi with 3:80 rear end.
• Dougs Try-Y ceramic coated headers.
• 4R70W electronic 4 speed overdrive transmission controlled by US Shift controller.
• American racing wheels 16” wheels
 
1 - 6 of 6 Posts
Top