Vintage Mustang Forums banner

1 - 3 of 3 Posts
G

·
Guest
Joined
·
0 Posts
Discussion Starter #1
I recently installed a C4 transmission in my 69 Mach 1 w/ a 351w and was using a FMX before. I hooked up the FMX linkage as best as I can, but it feels off when I move through the arch on the shifter.

My question is if this shifter will work for this application?

Thanks.
 

·
Registered
Joined
·
680 Posts
yes, your shifter will work, but, you may have to bend the arm just a little. The transmissions are a little different. Just put a couple of bends in the arm, to take out the arm feeling a little too long.
 
G

·
Guest
Joined
·
0 Posts
Discussion Starter #3
When you say arm, are you refering to the rod that connects the c4 to the shifter or the shifter?

Thanks
 
1 - 3 of 3 Posts
Top