69 mach trunk
1 - 2 of 2 Posts
Joined
·
6,807 Posts
Exterior body color (don't paint the gas tank 
Jeff Speegle
MCA Shelby Gold Card
www.geocities.com/MotorCity/6473/
Mustang & Shelby research, documentation, and help.
Where sharing with one .. means sharing with all
Jeff Speegle
MCA Shelby Gold Card
www.geocities.com/MotorCity/6473/
Mustang & Shelby research, documentation, and help.
Where sharing with one .. means sharing with all
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
I made a video on mixing up epoxy and other 2k primer for newbies
Vintage Mustang ForumWas going to spray some epoxy so figured I'd make a video. We get lots of questions from people new to the craft here so hopefully this can be a helpful demonstration. Specifically, I'm mixing up SPI epoxy.- 4
- 105
-
Lizer · updated
-
New leaf spring pins not in the same spot - should I be concerned?
Vintage Mustang ForumI just bought new Dayton leaf springs to be installed on my 65. I splurged a little for made in the USA. But after picking them up, I discovered the axle pins are not the same distance from the front spring bushings. Stuck a bolt thru the bushings in the springs to center them. You can see in...- 36
- 2K
-
Thermactor disassembly questions
Vintage Mustang ForumMy car has an original thermactor. I want to keep the engine bay looking original, so I want to disassemble both the emissions diverter valve (silver cannister) and smog pump so I can blast and powdercoat (or at least clean up) the cases for each. On the pump, I removed the four rear bolts...- 3
- 94
-
GBailey1018 · updated
-
She’s Alive!!
Vintage Mustang ForumHappy 4th Everyone!!! Nothing really to add that no one else has said about the ProFlo 4 but wow. She’s finally alive. Have some cleaning up to do but cold starts, hot starts etc no issues. Haven’t driven her yet as I’ll be installing the rear end in the next couple of days. Right now...- 10
- 251
-
Badbenz94 · updated
-
Cable shift linkage for C4
Vintage Mustang ForumI am absolutely fed up with trying to adjust my shift linkage on this car. Have stuff from different years on there, and it's just not working. I got it adjusted (or so I thought) and it was "fine" for a while.. but now it's not, and I'm fed up with it. For those interested... I followed the...- 2
- 82
-
Mel_llama · updated
Join now to ask and comment!