Vintage Mustang Forums banner

69 Window HELP!

1240 Views 5 Replies 6 Participants Last post by  chetz4d
Looking for advice on what to use to re-glue window to metal bracket on my 69. Both door window are now loose. Appreciate any help. Any specific glue for this ...
Thanks in advance

1969 Coupe
1965 Fastback (Project)
1 - 1 of 6 Posts
I used silicon RTV on one window when it ceremoniously fell out, it is in there solid now, glued about 1/4" too far back. The trick to lining these up when you glue them in (I found out after) is to run them all the way up when they are drying, and if need be tap them back or forward as needed.

69 Sportsroof, 351C, 4spd toploader, Restomod BOSS 429 clone - the one and only (?) 1969 BOSS 351
1 - 1 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.