Vintage Mustang Forums banner
1 - 1 of 1 Posts

137 Posts
Use a steering wheel puller period.

One problem I have encountered with the switchs is that the contacts can be too long. When you put on the turn signals, only the front or rear will flash on the opposite side. You will need to trim (shorten) the contact wire as it rides up on the plastic ramp.

Make sure your connection is a good one. The wires are smaller than the original and can pull apart. I recommend a small metal connector and some heat shrink tubing. Will save headaches later.

Rather easy job overall.
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.