715 holley carburator question
Join the discussion
Recommended Reading
-
Radiator and Fan Options for my Build
Vintage Mustang ForumGents, 1968 fastback, manual trans with A/C. 302 built up with 410 HP at the flywheel. Water pump is stock setup, lower passenger side. What are my options for radiator and fan? Motor is ready to be dropped in, so I am trying to plan ahead before it goes in. Would a 3 core aluminium...- 9
- 375
-
Help... it won't idle. Does not add up...
Vintage Mustang ForumI have a 1969 mustang coupe with a 302 Windsor, 600cfm Holley carn, edelbrock p2p intake. Recently hit 100 in my car! Yay! But parked it last night and went to turn it back on from a cold start. Pumped the gas twice, everything is normal, it's idling. I rev the car to take it off of fast idle...- 2
- 33
-
Alex Tugbang · updated
-
Autolite 1100 Help
Vintage Mustang ForumHey yall, first post here. I have an autolite 1100 on my 200 ci 65' coupe. Does anyone know what this vent tube is for instead of having the vent tube be connected to the accelerator pump? I've had the car for 15 years and it runs fine the way it is. Just wondering why the tube instead of a...- 3
- 87
-
65 Mustang No Crank
Vintage Mustang ForumI have read and troubleshot all the suggested, but I am legit losing my mind over this. I just put a 302 in the 65 and when I turn the key, I get the loud click in the solenoid. I bypassed the neutral safety as I now have a T5. I have 12v on the battery side of the solenoid; when key turns I...- 14
- 132
-
need a new carburetor
Vintage Mustang ForumI have a 1966 ford mustang convertible with a straight 6 engine. I am trying to fix it up and I need to get a new carburetor. I am a little confused because there is so many different types and I have no clue what I should get to replace it. Any ideas??????- 7
- 57
Join now to ask and comment!