[Guest]

Tonight I just finished up disassemblying and taking everying off so that the engine can be pulled. I just want to ask a few questions and make sure I got everything that I need off to pull it out.

Ok I have the exhaust un bolted, the radiator hoses, everything on the front down to the timing chain, the bell housing, the torque converter nuts, the power steering, all the msd ignition stuff. The battery wire attached at the back of the passenger side head. I think I got pretty much everything even if I didnt type it. The one thing I have a question about is the oil gauge hose. Its a braided hose and Im wandering how much oil is going to come out of it.

Thanks Guys and Gals John

 

[midpack]

shouldn`t be too much, just keep a coffee can handy.
i would pull the radiator out also so nothing bad happens to it