Anybody Seen 67Delilah Around?
1 - 3 of 3 Posts
Joined
·
19,191 Posts
He's busy with Boy Scouts and such...try posting on the old forum. I've been in touch with him via normal e-mail.
Let me check your shorts! My multimeter is just a-waiting!
King of the Old VMF with >5000 posts, so ignore the titles here...I'm really THE Old Fart *LOL*
Let me check your shorts! My multimeter is just a-waiting!
King of the Old VMF with >5000 posts, so ignore the titles here...I'm really THE Old Fart *LOL*
1 - 3 of 3 Posts
Join the discussion
Recommended Reading
-
1966 Fastback changing firing order to 302HO/351W order
Vintage Mustang ForumI Have a 1966 fastback with a 68 302 block edleblock heads,i decided to go with a paradise wheels paxton supercharger and the flowtech inductiion ed Curtis Custom Grind camshaft kit, I notice its going to have the 302HO/351W order , Before all this i bought a Davis Unified Duraspark Distributor...- 4
- 94
-
Subframe connector installation question
Vintage Mustang ForumI’m going to get them welded on but have a bolt-on kit I’m installing right now. The rear is supposed to attach via a threaded hole on the rear subframe. Due to being 50 years old I assume, the holes don’t align between the connector and subframe. The subframe hole is shifted about 1/2” towards...- 6
- 178
-
4 lug Scarebird disc brakes
Vintage Mustang ForumHell, Just wondering if anyone on this site uses or have used Scarebird disc brake conversion on their 6 cylinder Mustang. I am thinking of doing this, but have questions about if the stock 14 inch steel wheels will clear the calipers. The Scarebird site states if the offset is more than 3...- 6
- 102
-
Intake manifold options
Vintage Mustang ForumHI Situation : 66 HT 289 2100v stock. I have a 68 302 4BBL intake and newer 600 cfm Holley carb. Do I purchase an aluminum intake or use the old one? If I replace the intake which do you recommend. O- 9
- 206
-
oscarnielsen · updated
-
I cut my losses and found a local shop to do my brakes after wayyyyyyyy to much failure.
Vintage Mustang ForumI found out the last few days its really tuff to find a shop that will agree to work on a classic. When I was working on my brakes changing to new lines and wheel cylinders I decided to upgrade to the dual master cylinder and My troubles started. My master cylinder that I was sent did not work...- 15
- 444
Join now to ask and comment!