Joined
·
3,305 Posts
Trying to find a knowledgable '67/68 VMFer who wouldn't mind going to look at a car for me.
Thanks,
Mike
Thanks,
Mike
Anyone near Boise, ID?
1 - 5 of 5 Posts
Joined
·
3,305 Posts
Thanks guys,
If I don't hear from either 2 VMRers I'll PM them.
Mike
If I don't hear from either 2 VMRers I'll PM them.
Mike
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
Air conditioning for 6 cylinder
Vintage Mustang ForumThis may sound like I‘m crazy but since the compressor goes on the passenger side, shouldn’t the condenser also go on that side? The pictures I’m seeing are for the hoses and they are going in the drivers side and crossing over the engine? Anybody got pictures of this.- 14
- 279
-
Adtrivett · updated
-
67 Vert Cowl Shake: Ideas to correct
Vintage Mustang ForumMy 67 Vert seems to be suffering from the typical 50-60mph shimmy that I’ve come to learn is all too common on early convertibles. At this point it’s almost so bad, I avoid driving the car. And to make it worse, I have a close ratio toploader and 3.80 gears, so just driving over 65 to stay...- 23
- 328
-
caveeagle · updated
-
This weekends project
Vintage Mustang ForumI need a break from the engine bay side of things so I thought I would move to the other end and tackle this job. I need to go by my SILs house and grab a floor jack and a couple more jack stands. Safety First Success or failure will all depend on the foreward eyebolt. I have a sawzall and a...- 0
- 15
-
bmcgc · updated
-
Getting '69 Mach 1, need advice on well... everything (value, resto, etc.)
Vintage Mustang ForumHello everyone! New member with almost zero experience in restorations, please bear with me here. In the spirit of keeping this short: I have the opportunity to buy a 1969 Mach 1 from a distant relative. The car has been in my wife's family since new and has been stored for the past 15-20 years...- 13
- 200
-
DUI vs GM HEI distributor
Vintage Mustang ForumMorning. My 69 306 currently has a Delco GM HEI distributor (came this way). I put ford racing performance wires on. Last week in Hemmings I saw an add for the DUI distributors. Is there really any difference with the DUI brand to what I already have? Any info would be great. Thanks!- 4
- 101
-
RCL23 · updated
Join now to ask and comment!