[69convert]

Bishir,

You posted a question on the "old" forum about needing information on shifter parts you needed. I posted a response, but I'm not sure you saw it. I also wanted to try and see if I could attach a photo to my post. Here is the answer:

The rubber seal you need for the shifter is sold through National Parts Depot and Virginia Mustang. I bought mine from NPD. It attaches to two pins on the bottom side of the shifter assemby.

The other part you need is a shift indicator. Here is a picture of it:

http://y42.briefcase.yahoo.com/bc/sixtynineconvert/vwp?.dir=/My+Photo+Album&.dnm=69+Shift+Indicator.jpg&.src=bc&.view=l&.done=http://y42.briefcase.yahoo.com/bc/sixtynineconvert/lst?&.dir=/My+Photo+Album&.src=bc&.view=l

Good luck.

p.s. Don't change your name.

69convert
1969 Mustang convertible
351W 2V, FMX, Deluxe Interior

 

[69convert]

I don't have the catalog in front of me either (I'm also working hard), but I think the price for the rubber seal was $12.

I'm not sure why the image didn't load. Try this link for the shift indicator:

http://us.f1.yahoofs.com/users/7bd27feb/bc/My+Photo+Album/69+Shift+Indicator.jpg?bcJwSp6ACH5B8xuT

69convert
1969 Mustang convertible
351W 2V, FMX, Deluxe Interior