Vintage Mustang Forums banner

Attn: Charles Turner, or other knowledgible types

611 Views 4 Replies 1 Participant Last post by  Guest
G
I posted this a couple of days ago with no response, so I'll try again. Does anyone know the proper fasteners for the glove box door where it mates to the hinge on a 65? The P.O. used a variety, none of which seem to be correct. My illustration manual doesn't detail these, so I can't use the AMK guide for help.
Any help would be greatly appreciated,

James

1965 convertible "White Pony", my own lesson in mechanical humility
1 - 5 of 5 Posts
James,

NPD sells the kit of six screws as part number 06024-5K for .95 cents. Hope this helps.

Shannon a.k.a. The ShanMan! /forums/images/icons/cool.gif
66' Vintage Burgundy C-code coupe
http://albums.photopoint.com/j/View?u=1571656&a=11943851&p=42935059&Sequence=2.jpg
G
it's the same as the little screws holding the glovebox latch to the door. they are a little 5/16" head machine screw with a floating washer.

Charles Turner
MCA Gold Card Judge(64.5-65, 66)
'65 Fastback
'00 GT Conv, triple black


Check out my 65 [color:blue]fastback!</font color=blue>
G
I emailed a photo hope it helps
jimbo

M.C.A.# 50000
http://albums.photopoint.com/j/View?u=1575692&a=11979479&p=43517165.jpg
G
Thanks guys!

James

1965 convertible "White Pony", my own lesson in mechanical humility
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top