Vintage Mustang Forums banner
1 - 1 of 7 Posts

· Registered
6,700 Posts
I installed a Harada power antenna over 10 years ago on mine. Installation is fairly straighforward. Two things you will have to do are:
1) Fabricate a bracket/strap to secure the bottom of the power antenna. I used plumbers tape (metal strap stuff used for waterheaters).
2) Install / hookup the wiring - I ran the control for the antenna to the provided up/down switch. The radio I had at the time had a power antenna output, but when you put in a cassette, the antenna went down. So, I hardwired up the power antenna, and now I have CONTROL!!! HAHAHAHAHAHAHAHAHAHA!

Steve Leslie, 65 coupe in restoration. 302, toploader, A/C, disc brakes, bench seat
<P ID="edit"><FONT SIZE=-1>Edited by autoxsteve on 03/07/01 03:51 PM (server time).</FONT></P>
1 - 1 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.