Vintage Mustang Forums banner

1 - 3 of 3 Posts
G

·
Guest
Joined
·
0 Posts
Discussion Starter #1
Can anyone tell me how this cable is suppose to be hooked together? I was looking underneath my car and it looks like it is just hanging there. Thanks Jon
 

·
Registered
Joined
·
5,205 Posts
Mine too
 

·
Gone but never forgetten
Joined
·
25,239 Posts
If you fill out your profile, we'll be able to give better answers. On a '66, the cable goes to the lower arm of the throttle rod, and is held by a clip much like the door handle clips or the clip used on a stock throttle linkage to carb. On the kick down arm (on the tranny) it uses an e-ring IIRC ... would have to climb underneath the car tommorrow to verify (it's been a couple years since I put it on). There's also a spring that holds it up ... maybe you're missing the spring?

If you always do what you've always done,
You'll always get what you've always got

http://www.classic-mustang.net/johnpro
http://www.classic-mustang.net/john66/mustang/pics/66fsides2.jpg
 
1 - 3 of 3 Posts
Top