G
Guest
·Guest
Joined
·
0 Posts
I noticed your car, and was wondering what color it is?? It's very nice!! Will you be at Knott's?? Thanks!!
65 coupe 302
(rebuilding a 351W)
65 coupe 302
(rebuilding a 351W)
autoxsteve question
1 - 2 of 2 Posts
Joined
·
6,782 Posts
Color is Kinversand. It is from a 2000 Range Rover Discovery II and yes, I will be at Knotts.
Steve Leslie, 65 coupe in restoration. 302, toploader, A/C, disc brakes, bench seat
http://albums.photopoint.com/j/View?u=1571478&a=12287439&p=44845480.jpg
Steve Leslie, 65 coupe in restoration. 302, toploader, A/C, disc brakes, bench seat
http://albums.photopoint.com/j/View?u=1571478&a=12287439&p=44845480.jpg
1 - 2 of 2 Posts
Join the discussion
Recommended Reading
-
Electric fan and controls for 67 with 20” radiator
Vintage Mustang ForumI’m caving in and finally switching from an engine driven fan to an electric fan for my 67 with a 20” champion rad. The flex-a-lite 398 syclone seems like a decent choice from what I’ve seen, but I’m open to alternative suggestions. I’m seeing a lot of conflict regarding the reliability of the...- 5
- 121
-
AustinE · updated
-
Bleeding brakes. Frustrated, got to vent.
Vintage Mustang ForumSo I'm trying to bleed my brakes after replacing my master cylinder. I got a 65 6 cylinder with four wheel drums. I've gone around the car 5 times trying to get the brakes bled. I'm doing it with my wife doing the press, open, close, release method and got out all the big bubbles I could see...- 9
- 216
-
1970 4 Speed Top loader neutral linkage positions??
Vintage Mustang ForumI’m looking for the neutral positions for the shifter linkage on the 4 speed top-loader? I purchased the hurst competition plus shifter and linkage, but the OP “made” the previous linkage so I want to verify what the stock linkage looks like and how it’s installed.- 1
- 90
-
My Contribution to the “Squeaking” Database
Vintage Mustang ForumSince I bought my ‘66 about a month ago, I’ve had an issue with squeaking when I go over bumps, rough road, etc. It didn’t seem like a big deal because I’ve driven old Mustangs before and they’re not exactly built like tanks (no offense). Anyway, I searched old threads and found a lot of...- 1
- 114
-
Just how good should my brakes be ?
Vintage Mustang Forum65 Convertible disc/drum setup ,just had new dual reservoir m/c and booster installed , new rotors and calipers and lines ,new wheel cylinders and shoes on the back. Struggling with long peddle travel and soft stopping. Have bled several times and adjusted the rear brakes as much as my mechanic...- 90
- 3K
-
rtate · updated
Join now to ask and comment!