Best deluxe interior door panels for 69 Mach
Join the discussion
Recommended Reading
-
-
Subframe Connectors-Your Pick?
Vintage Mustang ForumHey folks. Quick question for you all..... What is you preffered sub-frame connector for a 1967-68 coupe? Having searched all around I feel like the Detroit Speed version is what I will choose. But, I also like the TCP setup with a eye down the road for their whole bracing kit. My fear with...- 47
- 735
-
+ coil terminal voltage climbs when car is running
Vintage Mustang Forum1965 A code 289 with stock everything , complete new OEM type wiring harness, new points , condenser, cap & rotor and coil ( "correct "replacement type ) . With the key on not running coil + is 6.37 V , with the car running it starts at 9.2ish and continues to go up as long as I hold the meter...- 9
- 148
-
Why does the shaft pull out of my headlight switch? 66 Mustang
Vintage Mustang ForumMy headlight circuit and fried, along with melting the headlight switch, so I replaced the wiring harness to the headlights, as well as the switch. I didn't replace the dash harness, as only one wire was fried -- which I replaced to the firewall. I had to insert the wires into the new headlight...- 9
- 253
-
Bad Gas, What now?
Vintage Mustang ForumSo, I'm a bit uncertain of how long my 66 car sat before I obtained it. But I know for sure it was atleast 3 years. How many times it was ran, I'm not sure. Anyhow, after a small carb mishap (some of you may have seen my other thread), I noticed when I tore the carb down there was a significant...- 22
- 451
-
cturboaddict · updated
Join now to ask and comment!