i'm replacing the clutch,pressureplate and trow out bearing im my mach.... i know most auto stores carry them,,,,, i've heard some pretty nasty things about advance auto clutchs,... so my choices are napa,autozone,fishers(fedarated), and auto value.anyone have good luck or bad luck with any of these stores as far as clutchs go?.... or somewhere else i can get a good clutch for a fair price?, i'm not running mega HP or anything i just want something that i wont have to replace in 6 months............ thanks jace
best place to by a clutch?
Join the discussion
Recommended Reading
-
Need Engine Gurus!!!
Vintage Mustang ForumI'm in desperate need of some ideas guys. I built the engine for my T/A racecar (everything new, including the heads) and the first time I fired it up to break the cam in, it ran great for about 8 minutes until it reached operating temp. Then it totally fell on its face and bogged way down so...- 91
- 4K
-
gikort · updated
-
Time to Move On
Vintage Mustang ForumI first want to thank all of you who have helped me along the way. This site has been a huge source of helpful information. But, I decided that I wanted to jump into the Chevy truck scene. I posted my car up on FB and Ebay, and it sold in 6 minutes. Someone in Australia bought it! I advertised...- 8
- 411
-
jgrote · updated
-
Really struggling with brakes, drum rear, disc front
Vintage Mustang ForumTrying to get to first drive and I am now down to brakes. Right now car is on jack stands in the rear with an open diff, stock converter in the trans. When I put the car in gear at idle of course the passenger side wheel turns. I cannot get the wheels to stop with strong effort on the brake...- 12
- 191
-
Tallguy · updated
-
Best outdoor car cover (weather resistant)?
Vintage Mustang ForumBreaks my heart but my '68 coupe has to spend the winter outdoors, in CA it's not that bad, however I want to protect it from RAIN, sun, etc. Did some searching here and the posts were very old or from the manufacturers - would love to hear all your fave brands, good/bad experiences and also the...- 12
- 349
-
Fuel Injected 5.0 Driving Me Nuts
Vintage Mustang ForumThe 5.0 in my 66 with Ford "suit case" injection surges below a 1500 idle. So far I've checked for vacuum leaks and found none, replaced the idle air control valve, the MAF and the Throttle Position Sensor with no results. I know this is an early Mustang forum, but I thought I'd give the...- 16
- 225
Join now to ask and comment!