BEWARE!!
1 - 5 of 5 Posts
Joined
·
17,130 Posts
Some knowledge can only be obtained through experience.
I hope all is ok.
I hope all is ok.
Joined
·
55 Posts
Awesome BOSS ! Great Color!
Yet another:
http://www.selectmotorcompany.com/images/boss/boss39.jpg
Yet another:
http://www.selectmotorcompany.com/images/boss/boss39.jpg
1 - 5 of 5 Posts
Join the discussion
Recommended Reading
-
Tail light Pug or pigtail?
Vintage Mustang ForumThere are two versions of tail light assemblies for the 1965 Mustang "Pigtail" and "Plug" I assume the Plug type is original but is there any benefit of the "pigtail"? Restoring a 'Tang to "original" is not easy because a lot of the aftermarket parts are a major improvement. TNX Roy- 4
- 114
-
More front spring craziness
Vintage Mustang ForumOn the 65 I put the 620's I had (for ever) which were for my 67 convertible build. Anyone remember Canadian Mustang? These are far too stiff and sit way high, even though they are 1 inch drop. And I know cutting these down isn't going to solve the super stiffness. Stock GT's are 291 and NPD has...- 18
- 546
-
ylexot · updated
-
Want to install 5.0 EFI engine
Vintage Mustang ForumHey everyone, I have a 66 with a T5 and a tired old 289. I'd like to install a nice running 1989 mustang 5.0 HO I found from a local foxbody guy. The problem is, I only know carburetors. Like all of us, I'm doing this on a budget. I'm also not familiar with fuel cells. My understanding is...- 14
- 748
-
Restoring my louvres, I'm screwed
Vintage Mustang ForumThe plastic slider on one had a crack in it but I mistakenly thought it would hold. As soon as I got the metal frame painted and began to re-assemble it the cracked corner which has one of the sliding tabs broke off and the tab is now separate so it broke right in the rivet hole for the tab...- 5
- 247
-
Comp Numbers 66 289 with Twisted Wedge 170 61cc
Vintage Mustang ForumTrying to do some compression number calcs to see if these heads would be a good fit for my 289. Currently a stock 66 289. Twisted Wedge 170 w/ dual springs and 61cc chambers What's the stock comp #s with factory heads? What would the comp be with the 61cc chambers on the TW? Plans are for a...- 21
- 411
-
cturboaddict · updated
Join now to ask and comment!