Vintage Mustang Forums banner
  • Hey everyone! Enter your ride HERE to be a part JUNE's Ride of the Month Challenge!
  • May's Ride of the Month contest ended with a tie! Go to this thread to vote on the winner! VOTE HERE
1 - 4 of 4 Posts

·
Vendor
1966 coupe and 1970 sportsroof
Joined
·
5,384 Posts
Discussion Starter · #1 ·
Our CNC machined Billet Export Brace is now available for 60-65 Falcons as well as 65-70 Mustangs.

Please visit our website for more pictures and information.



 

·
Registered
Joined
·
1,265 Posts
Hi Shaun-
Quick question. The two bolts that are shown in the pic in the spot I’ve circled...do you typically drill holes through the firewall and run the bolts from interior side of the firewall to the outside. Are these bolts used for anything other than holding the brace to the firewall?

Thanks!
 

·
Vendor
1966 coupe and 1970 sportsroof
Joined
·
5,384 Posts
Discussion Starter · #4 ·
Hi Shaun-
Quick question. The two bolts that are shown in the pic in the spot I’ve circled...do you typically drill holes through the firewall and run the bolts from interior side of the firewall to the outside. Are these bolts used for anything other than holding the brace to the firewall?

Thanks!
Yes, those get drilled through the firewall and secured on the backside with the supplied hardware. Helps to triangulate the brace and make a stronger connection.
 
1 - 4 of 4 Posts
Top