A couple questions:
The tops of my fender aprons where the fenders bolt on are a bit wavy. Should these surfaces be flat?
The top of my radiator core support bends in slightly toward the firewall. Should the top of the core support be straight?
After reading all the threads on operating temps, correct thermostats and overheating over the years, I wanted to really check mine out. I brought home a thermal IR gun from work. Started the car and watched the temp rise right at the temperature sensor. Check temp, look at gauge, check...
Sanding, sanding and more sanding.
Working from the firewall foreword.
Every time I think that I am getting ready for a final primer coat I decide that an area or two needs a little bit more work.
I pulled the hood today, so the apron behind the hinges needs some prep work.
Since the hood is...
Hi. I have found only a few small online shops for Classic Mustang parts, located in Europe.
Does someone know some good ones so i dont need to spend on high shipping costs.?
Could be Poland, Germany, etc.
Hey guys, I’ve got a vacuum leak coming from my carburetor spacer. I used new gaskets when I was installing it, but the engine increases in RPM when I spray carb cleaner on it. Car has a hissing sound when running and doesn’t idle smooth.
How can I ensure I install the new carburetor gaskets...