Vintage Mustang Forums banner
1 - 1 of 4 Posts

· Registered
1,505 Posts
If you have no leaks the first think I would check is the compatibility of the Mavrick M/C with the calipers you are using. Mavrick M/C may have too small of bore (less fluid displaced per travel of Brake pedal. Mavrick caliper/ wheel cylinders may have been smaller in fluid capacity allowing the use of a smaller bore M/C. This would equate to spongy brakes and increased stopping distance due to not supplying enough pressure to calipers/Wheel cylinders. You may want to check your parts compatibility.

Mark Memmer
70 Calypso Coral Mach 1 351C 4V Completed by 8/01
98 Cobra Convertible
93 5.0 Mustang LX (Winter Ride)
00 Volvo S80 (Wifes Ride)
1 - 1 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.