Were you able to get the dipstick tube out in one piece? They all seem to be cracked or broken. What does the bellhousing look like? Any cracks? Do you have the rear cooling line adapter (check valve)? I may be interested in the speedo output unit too.
Sorry, tube was already broken off. Bellhousing is in great condition. I'm not sure what the cooling line adapter is, but if internal, it's there. Make me an offer on the parts you like. Located in Wisconsin. Thanks, Jack
Have to figure what I'd be on the hook for on shipping. The bellhousing is heavy. The rear cooling line appears to still be attached. The adapter goes between the metal tube and the trans housing. Thanks I'll let you know.
This carb only has idle time. About a half hour. I want to be totally forthcoming about it. Here's my thread about this carb:
Carb leaked out of the...
Are you tired of dealing with the possibility of splash-out when filling your classic Mustang with fuel ?? I was certainly fed up with gas pump drama with my 1969 and searched the internet for solutions a few times over the years and basically found nothing.
In the fear of splash-out...
I have for sale the following. Doing a fuel injection conversion and can't use this stuff. All has less than 500 miles on them and has ALWAYS been used with ethanol free fuel.
Fram HPG-1 Filter kit - $20
Summit Racing Fuel Pressure Regulator, with -6 AN fittings and fuel pressure gauge...
vintage original matched set of 4 off car sitting since the 70s - guy insalled new tires then got in a fender bender - they are riveted wheels original ford - all have driver quality caps and rings - tires are ancient mobil radials but there appears to be no cracking or dry rot - size is...